OneGauge Digital to Analog Converter

The OneGauge Digital To Analog Converter allows you to use stock-style analog gauges (or aftermarket analog gauges) with any of our input types- standard sensors, OBD-II, or Aftermarket ECUs! 

The DAC has 6 total outputs- 4 for standard temperature/pressure/fuel level gauges, one for tachometer, and one for speedometer. These can each be configured to your needs, with a small screen included for initial setup. Gauge sweep, min/max readings, and more can be configured on the handheld setup screen (see our video here for details: https://youtu.be/fGIE6cCPe7Y). Note that additional hardware/adapters may be needed for tachometer and speedometer compatibility with your cluster, especially for cable-driven speedometers.

The DAC is intended for use with analog gauges that are connected directly to a sensor. Newer instrument clusters, which may use can bus or another digital-style connection, are not compatible with the DAC (Stock instrument clusters started switching to digital connections in the late 1990s). The DAC is also intended to replace electrical gauges- mechanical gauges are not compatible. If in doubt, reach out to us for confirmation! 

Each unit ships with 6 ft of power wiring, the handheld setup screen, plus additional components as selected. 

Please select, based on the input options above, how you plan to get data into the DAC. If you select 'Standard Sensors' and do not purchase any sensors from us, please email us a list of sensors (with part numbers and/or resistance charts/tables) you plan to use. Additional charges for programming time may be required for custom sensor setups. 

If you need to purchase additional sensors not listed on this page to use in conjunction with this unit, please use the Sensor Purchase page or feel free to reach out to TheOneGauge@gmail.com for a custom quote!