How does this thing work?
The OneGauge Hub is the "brain" of the system. It collects data from your ECU, standalone sensors wired into the Hub, or a combination of both. The Hub then processes the data and sends it to your display, whether it be an Android device via Bluetooth or a OneGauge Standard LCD screen or PiDash display via wired connection.
Will the OneGauge work with my vehicle, boat, kart, motor, experimental aircraft, RV, etc?
The OneGauge takes data from sensors, ECU connections, or both, and sends that to universal displays. The only limitation to what you can install the system on is your ability to provide the OneGauge with data and develop a display mounting setup. We offer tons of options and advice, so please reach out! We also have almost 100 vehicle-specific kits that offer almost direct-fit mounting for our displays, and these can be used with any OneGauge Hub whether it be sensor kits or ECU kits.
What are the features of a OneGauge Hub?
Below is a full list of features that OneGauge includes or features that can be added to a standard setup.
Keep in mind, we are constantly improving the OneGauge setup and adding features, and we may have forgotten something- please reach out if a feature you need is not on this list!
- Nearly instant and highly accurate readings for almost any sensor you can imagine
- Compatibility with off-the-shelf components and sensors for easy and inexpensive upgrades
- No programming or technical knowledge required to install or operate your gauges
- Limitless analog and digital inputs and outputs to monitor and control anything
- One-on-one customer service to answer any and all questions
- Custom cluster mounting and installation options available for hundreds of vehicles
- Multiple sensor options to work with any engine
- Variety of affordable and customizable display capabilities
- Support for just about any sensor imaginable
- Lap timing and race features like 1/4 and 1/8 mile times, custom or pre-set track lap times, fuel mileage calculations, etc.
- If you can dream it, we can probably build it! Reach out to info@theonegauge.com with questions or requests!
When will I get my order?
We will work quickly to ship your order as soon as possible. Some orders can ship in as little as a day, while more complex and custom orders can take a few weeks. If lead time is an issue, please reach out to discuss expedited labor.
Where are your products manufactured?
We source individual components from the United States and abroad, and final assembly and programming is handled in Arkansas custom to order for each customer.
Do you sell internationally?
We can sell to any country we can ship to!
Can I keep my factory gauges and just use this for extra data or for data logging only?
Absolutely! While most people use the OneGauge as their only data display, many people will use it as a secondary display that's only active when they're at the track, or they'll use the Hub's datalogging features to capture data from sensors that aren't wired to the ECU (such as EGTs and wideband AFR sensors).
Can I add more designs, sensors, and modules after purchase?
The OneGauge was designed to be customized as you modify your vehicle. You can easily wire up additional sensors, plug in or solder additional modules, and change your ECU connection. Typically we would send you a firmware update to complete the change, and this is quite simple to do.
What kind of warranty does OneGauge offer?
We keep our prices as low as possible. Instead of adding $100s to each order and offering a super long warranty, we offer a basic warranty that lasts 90 days starting when the package is marked as delivered. This warranty covers failed modules and defects in workmanship, but does not cover damage caused by improper use or accidents. Most of the system is modular, which means any repairs or replacements are extremely cheap: instead of paying for a new system, you simply replace the specific part that has failed. Our customers have preferred this over paying up-front for a warranty they likely won't use. Our systems are used in demanding conditions, and while they hold up nicely to all sorts of environments, we would go out of business repairing/replacing units that were damaged from being thrown around and covered in oil. If you install the system properly and protect it adequately, you shouldn't have any issues for years to come.
What's a OneGauge Hub?
The OneGauge Hub is the “brain” of the OneGauge setup- it receives all of the sensor data and sends it to your selected screen. OneGauge is based on the popular Arduino platform, which makes it easy and very inexpensive to replace components in the future. Screw terminals are provided so that sensors can easily be added by the user.
A standard hub supports 6 analog inputs that come standard as 3 analog temp sensors, 2 fuel level sensors, 1 analog pressure sensor. The system also supports 7 5v inputs that come standard as 5 digital pressure sensors (including vacuum/boost), 2 oxygen sensors. Additionally, each Hub has 3 voltage inputs, 2 RPM/tach or VSS speed inputs, 4 digital temperature inputs, 8 high temperature sensor inputs, and various other optional features like a GPS speedometer, accelerometer for vehicle roll/tile or g-force readings, SD card data logging, a permanent storage device for Odometer/trip/hour readings, CAN-BUS communication with various devices like TPMS systems, 2 LCD screen outputs, and more. All of these can be custom configured when order to suit your needs.
What are the display options?
All OneGauge setups include the ability to connect to an Android phone, tablet, or android head unit to display sensor readings on either Torque Pro or RealDash. These apps allow you to completely customize your dash design and layout, integrate maps or dash-cams, datalog, and much more!
LCD touchscreens are the most versatile and customizable display option we offer. These screens have a more professional and permanent appearance and are ideal for instrument clusters or center consoles. LCD touchscreens offer options such as on-screen buttons to control vehicle accessories via relays or LED lighting options for your screen bezels so you can add lights for turn signals, gauges, or warning lights.
If you have some graphic design skills, you can design your own gauges and gauge layout to fit your vehicle. If not, don’t worry- you can adjust one of our pre-made screen designs or we have designers available who could help you design your ideal screen. To see some of our pre-made screen designs, visit our Themes page.
PiDash screens allow you to use any HDMI-based screen for your OneGauge system! This also opens up options for on-screen customization of your gauge design, wider screens of different sizes and shapes, backup cameras, audio/radio control, and much more.
I'm sold, how do I purchase one?
For most people, using our online store is the easiest and quickest. However, if you need a completely customer setup with sensors and options that we don't list (such as wheel travel sensors, brake temp, ethanol %, custom gauge designs, etc) then use our contact page or email us (info@theonegauge.com) and we'll work up a custom invoice for you!
What Our Customers Say
Real reviews from real customers
