Welcome to the OneGauge Installation help page!

We’re happy to help you with your install. The following resources will help guide you through what is required, but if you have any questions please feel free to reach us at info@theonegauge.com!

The primary instruction manual can be found here. Please note, it is very detailed and covers all aspects of installation so it is long and it’s unlikely you’ll need to read the whole thing, but please browse it before installing so you are familiar with the basics.

Product Support: We are more than happy to provide fast responses to support requests and any assistance that is required for troubleshooting. Please leave plenty of time for install before a major deadline, such as an event or trip, to ensure that adequate time is available to set up the system. We only do very limited troubleshooting by phone- due to the nature of our business we are only rarely available for phone calls, and after many different troubleshooting experiences have found that email is a much faster way for us to answer customer requests. Email allows us to respond quickly with any software updates required, and videos can often help us troubleshoot more quickly. When requesting support, please provide a detailed description and pictures/videos if possible to help us best understand the issue.

There are a number of specific installation videos below for things like Bluetooth/Torque Pro, LCD screen menus, and more! Please also see our FAQs below as well.

Bluetooth and Torque Pro Setup

Please note that you’ll need to create NEW gauges in Torque Pro and RealDash. The default gauges that launch when you start the app for the first time are linked to an OBD-II reader, not to OneGauge.

RealDash Button Setup

Please note that you’ll need to create NEW gauges in Torque Pro and RealDash. The default gauges that launch when you start the app for the first time are linked to an OBD-II reader, not to OneGauge.

LCD Screen Menus

FREQUENTLY ASKED QUESTIONS

  • How do I set up my fuel level reading?
    • If you have a OneGauge LCD screen, touch in the top left corner of any gauge screen to access the primary menu. Here, select the “setup menu” button, then go to “fuel setup”. On these screen you can enter the ohms of your fuel sender at full and empty.
    • If you don’t have a OneGauge LCD screen, please email us and we’ll send you an update to calibrate the system to your fuel sender specs.
  • Can I set a custom odometer reading?
    • Yes, please email us your desired reading and we can send you a code update to set it. If we haven’t shipped your unit yet we can set the odometer before we ship it!
  • How do I change the way my screen looks (change the splash screen, gauge designs, etc).
  • My gauges aren’t working in Torque Pro or RealDash. What’s up?
    • First, make sure you’ve followed the instructions carefully in the main instruction doc linked above.
    • Second, verify that you’re not using the default Torque/RealDash gauges. These won’t work. You’ll need to create new gauges, or reassigned the sensor/channel assigned to the default gauges to use the readings provided by OneGauge.
      • In Torque Pro, all of the OneGauge readings start with a “.” and are at the top of the gauge list. For example, “.CoolantTempA” is analog coolant temp.
      • In RealDash, all of the OneGauge readings are found in the “ECU Specific” sensor list and they all start with “OneGauge”.