michael

About Michael

This author has not yet filled in any details.
So far Michael has created 25 blog entries.

New Partnership: Dash Inserts & Custom 3D Prints

By |2020-11-20T12:09:51-06:00November 20th, 2020|

To make it easier for customers to mount their screens, we'll be partnering with Carlos at "Dash Inserts & Custom 3D prints", who makes custom 3D-printed, easy to install instrument clusters that allow you to easily fit a OneGauge screen into your dash in place of your instrument cluster. Carlos already has a long list

Custom Cluster Walkthrough

By |2020-10-25T22:35:08-05:00October 25th, 2020|

We get a lot of questions about the process of creating a custom instrument cluster, so we wanted to show the process and how it can be an easy weekend DIY project. We'll also refer you to this prior post with a few ideas on building your own cluster. 1.

Announcing Partnership with PiDash

By |2020-09-18T15:10:45-05:00September 18th, 2020|

We are excited to be offering another screen option- our most versatile yet! OneGauge will now directly connect to PiDash, a Raspberry-Pi based screen option that runs the popular software TunerStudio.  Here are some features: Nearly unlimited variety of screen options- anything with HDMI! Many "widescreen" format screens that better fit rectangular dash openings are available

OneGauge Changes

By |2020-08-20T19:22:35-05:00August 20th, 2020|

Hey guys! Michael here. I've been running this business by myself for the last couple years and have been amazed at how much it's grown and how eager so many of you have been for products like this. I'm grateful for your support and interest- keep it coming! We're going to be make some important

Screen Design Walkthrough

By |2020-06-17T20:54:52-05:00June 17th, 2020|

A quick walkthrough of our current screen designs and a demo of how to navigate through various settings and features of the OneGauge LCD touchscreens.

Added Features – May 2020

By |2020-05-19T10:02:02-05:00May 19th, 2020|

We're always working to add new features at OneGauge. Here are couple we've added recently: Support for CAN-BUS enabled input and output devices. These include aftermarket ECU's such as MaxxECU, Link G4, Haltech, and other ECUs that either have published their CAN-BUS protocols or allow you to set up custom CAN-BUS output. CAN-BUS input

OneGauge V2 Sensor Compatibility List

By |2020-04-29T10:46:21-05:00April 29th, 2020|

OneGauge Hubs work with all sorts of sensors- temperature, pressure, fuel, and many more. Want to add sensors to your setup? Here's a full list of everything that works with a OneGauge setup. Updated 4/29/20. Screw Terminals A1 - A6:  These six terminals provide six inputs for analog style sensors. The three sensors

Go to Top